This article is dedicated to the Sagemcom f@st 2804 device. In the recent past, Rostelecom and MTS began to actively promote it. The latter supplies it under the name “MTS Universal Router”.

Upon closer examination, it turns out that this device combines the functions of a 3G, ADSL, and Ethernet router. In addition, it can work as a wi-fi access point that supports 802.11 n/g/b. Additional bonus: supported IPTV. The router's equipment is not very rich, but, nevertheless, everything you need is there.

Please note that MTS offers two models that differ in appearance and software (V1 and V3). The latest firmware versions of the MTS universal router allow you to connect more than 13 modem models to it.

By the way, you can download the latest version of the software, installation and recovery instructions on the official website.

Rostelecom offers a V7 version of the device. But their website, unfortunately, cannot boast of the presence of fresh software. There is only a brief specification of the device universal router f st 2804, and instructions.

The router, manufactured by Sagemcom, allows you to connect to the Internet via a high-speed connection.

The most notable characteristics of this router:

  1. high-speed connection via telephone cable, while the telephone itself is free;
  2. support for IPTV transmission to digital set-top box;
  3. accessing and managing multimedia content.

The device is equipped with a modern, powerful processor that allows you to connect to the Internet at maximum speed, in addition, it is possible to view several high-definition IPTV channels at the same time.

Wireless device interface router fast 2804 V7

The Sagemcom router supports the 801.11b/g/n WFA specification. It also has a 2x2 transmit/receive configuration, thanks to which the actual connection speed reaches 80 Mbps. The following modern security protocols are supported: MAC address filtering, WPA, WPA2, WEP. The router is equipped with a function for automatic selection of a radio channel and a separate button, which provides convenience and simplicity of wireless connection according to the WPS protocol. There is an additional button on the case that turns on the wireless interface.

Multimedia content

The device is capable of operating as a DLNA server version 1.5, supporting the Webdav, Samba, UPnP protocols, which allows access to multimedia content from any device. There are two USB ports through which access to a printer or external storage can be provided.

Router functions

The router supports a large number of IP services applicable to double-play routers:

  • IGMP proxy/snooping
  • DNS dynamic/server/relay
  • DHCP relay/server/client
  • Full speed IP routing

Firewall

The 2804 v7 router has a firewall with the following functions:

  • Complete address/protocol filtering/port
  • Stateful Packet Inspection

Configuring traffic through the application firewall:

  • VoIP services based on H.323 and SIP
  • a large number of WEB applications

Connection using the example of a device from MTS

Router 2804 makes it possible to implement a broadband Internet connection in an office or home network through channel reservation:

  • 3G modem, Wimax, Fon;
  • on PC and TV IP television;
  • wireless Wi Fi connection (802.11 n\b\g)

The modem is connected in the following order. We connect the cable to the RJ-11 connector via a splitter. The universal router is connected to the computer via an Ethernet cable; for this purpose, there are four connectors on the back of the router. The external modem is connected to the USB port, then the router itself is connected to the network.

An external modem can be used to reserve an Internet channel. If the main channel is interrupted, the device will automatically switch to a connection via an external modem.

Setting up the router

Having established an Ethernet connection, open the browser and enter the IP address of the device. The default address is set to: 192.168.1.1. After this, the system will require authorization. We enter your username and password, or leave the default one, then in the window that opens all the settings necessary for working with the Internet appear: universal router settings, connection parameters, channel configuration, wireless connection.

A separate tab provides advanced configuration of the f st 2804 router, which is required for experienced users. Once you enter and save the required data, the connection setup is complete.

It was mentioned above about the possible reservation of a channel for those cases when the main connection is lost. This is done in the following tab: “3G channel configuration”. We put a tick in the inclusion point, and after 15 seconds. the device will automatically switch to the connection via the backup channel. When the main connection is restored, the router will automatically switch back.

Setting up a wireless connection, the basic parameters contain: enabling the WLAN module, the function of not detecting an access point, the Mac address of the wireless connection, network authentication and selecting the channel through which the router communicates with clients.

In the “Management” tab, you can back up setup data, update or restore the system. After updating the device software, the previously used settings are retained. The update takes place in a couple of minutes.

Let's summarize the above

The fast 2804 universal router is quite large, but working with it is very simple. The functionality of the device is high, it is possible to implement all the necessary resources, including backup switching from the main connection to an additional one. Everything described gives reason to believe that a universal router from Sagemcom will be one of the most convenient options for implementing office or home communications.

This review will step by step review and describe the setup of the Sagemcom F ST 2804 V7. This is an entry-level router, which is often sold in addition to the services provided by domestic providers. These include the national MTS and Rostelecom. It is on the example of configuring the connection of such a router to the network equipment of the latest company that this material will be presented.

Network gateway components

Standard and typical supply list for this router. Separately, it should be noted that such a network gateway is tied to the equipment of a specific provider. That is, if the router is designed to work in combination with software and hardware from Rostelecom, then it will only work in this combination.

The delivery list includes a router model Sagemcom F ST 2804 V7. Setting up a Rostelecom connection is described in detail in the operating manual. The manufacturer did not forget to include a warranty card in the package, which is valid for 1 year. This is a complete list of components for this solution. This list is supplemented by a power supply with a 0.5 A output and an interface cord, which is mainly used when setting up a network connection.

Also included in the delivery list is a CD with specialized software. By default, the hero of this article has software version V5, which cannot work normally with Rostelecom equipment. Therefore, it is necessary to reflash the router discussed in this material to version V7.

Main settings

The main parameters of this router are as follows:

  • Three possible methods of connecting to the Internet: Ethernet, ADSL and 2G/3G (in the latter case, you must additionally purchase an external modem and a starter package to be able to connect to a cellular network).
  • Four RJ-45 ports, which can be used both for connecting computing devices via twisted pair to the global web, and for switching television set-top boxes.
  • One USB standard port, which is used to connect a modem.
  • A wireless network based on a Wi-Fi transmitter, within which information can be transmitted at speeds of up to 300 Mbit/sec.

The body of this device is plastic. May be white or black. On one side of it there are information LEDs. The first of them signals the presence of power, the second - an active ADSL connection, the third indicates the availability of information from the Internet. The following information indicator indicates the operation of the wireless network. Next are four LEDs that characterize the functioning of the wired segment of the internal computer network. The last light element in this case shows the operation of the USB port built into the router.

On the top side of the device there is a USB connector and two buttons. One of them includes the network gateway of this model, and the second uses the technology of automatically connecting the device using Wi-Fi.

All connection ports are located on the opposite side of the information panel. These include an ADSL connector, a USB port and 4 RJ-45 ports. There is also a power socket here. There is also a button to reset the software to its original state.

Connection

At the first stage, setting up the Sagemcom F ST 2804 V7 comes down to making the following connections:

  1. We install the router at the place of use. The latter must meet the following requirements: there must be a socket as close as possible, the input ADSL wire and interface cords from computers must be supplied.
  2. Next we connect the power supply.
  3. Then you need to switch with the ADSL provider’s equipment.
  4. The last stage is the collection of the wired part of the computer network.

Setting up an external wired connection

At the first stage, you need to update the router software shell. To do this, on a PC connected to the network gateway, launch the CD and in the autorun window that opens, select the “Router update” item and wait for this operation to complete.

Then setting up the Sagemcom F ST 2804 V7 comes down to configuring the external connection. To do this, we reinitialize the launch of the CD and select “Full setup” in its menu. Next, we follow the instructions of the wizard and set the connection parameters, which can be taken from the contract with the provider for the provision of services. At the end, save the entered data and exit the setup wizard.

Setting up the modem

The next stage is setting up the Sagemcom F ST 2804 V7 modem, with the help of which a backup method of connecting to the Internet is implemented. It consists of the following actions:

  1. We select a supported 3G modem model and purchase it along with the starter package. We put everything together and connect it to the router.
  2. We launch any available browser on a PC that is directly connected to the network gateway.
  3. In its address bar, enter the device address in the format 192.168.1.1.
  4. Next, in the request window, in the “Login” and “Password” fields, you must enter admin. After that, click the “Login” button.
  5. Go to “Advanced Settings” and select the “3G Configuration” sub-item.
  6. Then we set the PIN code for the installed SIM card.
  7. We save the data and exit the program shell.

Setting up an internal connection

The wired connection is automatically configured, and there is no need to perform any additional manipulations with the software parameters of the Sagemcom F ST 2804 V7. Wi-Fi setup also happens automatically. The only thing you definitely need is to rewrite the name of the network and the password to connect to it from the bottom cover of the device. In the future, simply enter them in the appropriate request.

IPTV

The router in question supports IPTV technology, with which you can watch television programs. In this case, the step-by-step setup of the Sagemcom F ST 2804 V7 router is performed as follows:

  1. We go to the router configuration menu using the previously described method.
  2. After opening the setup interface, you need to go to the “Advanced settings” sub-item. Then you need to select “Interface Grouping”.
  3. At the next stage, click the “Add” button and set the connection port for the IPTV set-top box.
  4. Save the settings and exit the setup interface.

Price

Currently, such a router can be purchased for 1200-1500 rubles. Again, it is advisable to purchase such a solution only if Rostelecom acts as the Internet traffic provider. Taking into account the functionality of the device in question, such a cost is quite justified.

Conclusion

A very high-quality, functional and at the same time very affordable network gateway is the Sagemcom F St 2804 V7. Setting it up is a fairly simple operation, and every user can handle it. The provider has simplified the process of its implementation as much as possible. Therefore, such a router is simply ideal for creating home computer networks.

This router is well known to people who use the services of the Rostelecom operator, because it is this company that issues SAGEMCOM F@ST 2804 v7 to its users. The device has a good signal and stable operation, it has a nice design, enviable characteristics and wide functionality. An important advantage is the presence of USB ports, using which you can activate a 3G modem and create a backup channel.

Users have the opportunity to connect a 3G modem to the router

Let's take a closer look at how to configure the SAGEMCOM F@ST 2804 v7!

  • high CPU power of the router;
  • IPTV;
  • filtering by MAC address;
  • compatibility with various devices;
  • support for multiple IP services;
  • when connecting a telephone to the wire, the line remains free;
  • Rostelecom provides technical support;
  • shockproof housing;
  • 300 Mbit/s;
  • When problems occur, communication channels are switched automatically.

The equipment can be controlled remotely, this was made possible thanks to the TR-069 client. The device from SAGEMCOM also supports modern IP services: DHCP, DNS, IPv6, IGMP, IP routing (full speed).

Firmware

To make the SAGEMCOM F@ST 2804 v7 router work better, you can flash it to the latest version. In the “Device Information” section you will find out the current software version.

You can find the latest firmware on the website of the developer company.

After downloading the firmware to your PC, you can begin installation. This is done in the “Software Update” item of the “Management” section. Click on “Select file” and enter the path to the program. Now all that remains is to click on “Update”.

The firmware process will take some time, but you should not turn off or reboot the equipment. After the procedure, the product will perform a reboot on its own.

Internet

There are no particular problems when configuring SAGEMCOM F@ST 2804 v7 from Rostelecom. All manipulations are performed through the interface. First, we recommend that you register the route “192.168.1.1” and enter authorization data. For a new product, enter the keyword admin in both fields, and if no changes occur, then click reset.

So, the setup begins with creating a PVC connection. Find the item “ATM PVC Interface”. Having done this, click on “Add” and set the following parameters:

  • VPI/VCI - 0/33;
  • Encapsulation mode - LLC;
  • DSL Link type - EoA.

Then add a connection through the “WAN service” (click on “Add” in this window). It is recommended to set the physical interface to the atm0 position.

Interestingly, the network here can be selected as “Bridge” or “Router”. The system will prompt you to make this choice during setup.

When using a PPPoE connection, enter the following data in the fields provided:

  • login/pass - enter the data provided in the agreement;
  • To avoid repeating PPP authentication in case of an error, check the box next to this item;
  • service name - come up with a name for your network;
  • auto authentication.

Also enable Firewall and NAT (these fields may be missing in some firmwares). There is no need to touch other fields, click “Apply”.

Now re-enter the login/pass of the router issued by the company into the “Internet Connection”, and then reboot the device to get started.

Wi-Fi setup

Wi-Fi on the SAGEMCOM F@ST 2804 v7 from Rostelecom is configured very quickly. Select “Enable Wi-Fi” in the “WLAN Settings” item, and enter the following in the “Security” section:

  • WPS - Disable;
  • type - WPA2-PSK;
  • SSID - enter the name of the network;
  • encryption - AES;
  • password - come up with a reliable key.

Errors when setting up the Sagemcom F@st 2804 router

Theoretically, setting up the Sagemcom F@st 2804, v7 router from Rostelecom is not a problem. Immediately after receiving the router for rent (a couple of years ago), I connected the device to the computer, inserted the supplied disk with the software (Settings Wizard program) into the drive, and after a few minutes the Internet was already working. A couple of days ago I needed to configure the same router for a different subscriber, but the setup from the disk ended with the red light coming on. Those. The Internet LED indicator (with the @ symbol - dog) signaled that there was no Internet connection.

The red light with the @ icon is on on the router - the Internet is unavailable

As a rule, this indicates that incorrect settings have been entered. Since the setup was carried out from the disk, I could only make a mistake when entering the login and password, but the catch is that they were previously “hammered” into Notepad and I simply copied and pasted them, i.e. the error has been eliminated. I reset the settings to factory settings several times and tried to configure the router again using the included disk, the result did not change.

As a reference, I remind you that you can reset the router to factory settings using the Reset button. To get to it, use a paper clip or toothpick.

Error messages during setup

During the “dancing with a tambourine” various errors occurred, which are presented below in the screenshots.

“The wizard did not detect the router” - this means that the setup program does not “see” the router at all

“The router is unavailable” - the message appeared during the Wi-Fi setup stage. Simply put, the computer “lost” the router again

I tried to go into the settings via the web interface (IP 192.168.1.1 , login and password admin), but I couldn't do it. I noticed that you can log in via the web interface without problems if the settings are reset to factory settings. I read on the Internet that the LAN cable should be connected to the second connector and use the IE (Internet Explorer) browser. Alas, the trick also failed.

It is not possible to reach the router’s web interface, although the IP address is entered correctly - 192.168.1.1

Where did the dog rummage?

After unsuccessfully trying to turn the red dog into a green one, I erroneously concluded that the router had failed. I contacted Rostelecom technical support (toll-free technical support number 8 800 100 08 00) and left a request. The next morning I waited for the call and found out key information - When setting up the router, the network cable must be connected to port No. 3, and not No. 2, as indicated in the online source.

When setting up the router, the network cable must be connected to the LAN3 connector - on the Sagemcom 2804 router in a white case, it is marked in green

After connecting the cable to the correct connector, I was able to go into the Sagemcom F@st 2804 settings via the web interface and understand the reason why the “dog” icon was red after trying to configure from the disk. It turned out that the information about the login and password was not saved from the disk after configuration - the corresponding fields were empty!

After entering the username and password, the Internet started working.

The “dog” icon turned green - the Internet is working! Pay attention to the icon for connecting to the Ethernet port - the number “3” lights up next to it, indicating that the cable is connected to LAN3

Is it really that simple?

As my further excrements showed, configuration using the Settings Wizard may end with errors even if the network cable is connected to the LAN3 connector.

As I understand it, the errors “Presence of PPPoE connection” and “Connection to Rostelecom server” indicate that the login/password pair was entered incorrectly, although I again copied the data from Notepad. As you probably already guessed, the login and password were again not saved in the router settings.

There are two ways to solve the problem:

  1. Go to settings via the web interface and add a login and password;
  2. Restart the router setup from the disk.

Was it possible to do without unnecessary headaches?

It often happens that we pick up the instructions only after we have broken something :) If you take the paper instructions for the Sagemcom F@st 2804, v7 router, then it does not say anything about the need to connect a network cable to the LAN3 connector. However, this is clearly indicated when using the Setup Wizard, which is installed from the CD.

To be honest, I didn’t pay attention to this nuance at all, perhaps due to the fact that earlier, for which the port number is not critical. In general, I wonder how the LAN3 port on the Sagemcom 2804 differs from others?

conclusions

  1. When setting up the Sagemcom F@st 2804, v7 universal router from Rostelecom, connect the network cable to the LAN3 port (marked in green).
  2. To avoid the hassle of setting up your router via the web interface, use the Settings Wizard from the included CD. If you don’t have a CD, download the Settings Wizard from the official Sagemcom website (the clever software is called “Automatic configuration and firmware update/recovery program”, in short, a settings program).
  3. Sometimes you should read the instructions - in many cases this will save you unnecessary headaches.
  4. Learn from the mistakes of others, and specifically from ours. To do this, do not forget to bookmark the site :)