Install optional products - DriverDoc (Solvusoft) | | | |


This page contains information about installing the latest D-Link Wireless Router driver downloads using the D-Link Driver Update Tool.

D-Link Wireless Router drivers are tiny programs that enable your Wireless Router hardware to communicate with your operating system software. Keeping your D-Link Wireless Router software updated prevents crashes and maximizes hardware and system performance. Using outdated or corrupt D-Link Wireless Router drivers can cause system errors, crashes, and hardware or computer failure. Moreover, installing the wrong D-Link drivers can make these problems worse.

Advice: If you are not sure how to update D-Link device drivers manually, we highly recommend downloading the D-Link Wireless Router Driver Utility. This tool will download and update the correct D-Link Wireless Router driver versions automatically, protecting you from installing the wrong Wireless Router drivers.


About the author: Jay Geater is President and Chief Executive Officer of Solvusoft Corporation, a global software company focused on innovative service offerings. He has a lifelong passion for computers and loves everything related to computers, software and new technology.

Despite the fact that the firmware of the relatively recently widespread Wi-Fi router D-Link DIR-300 D1 is not much different from previous revisions of the device, users have questions related to a small nuance when they need to download the firmware from the official D-Link website , as well as with an updated web interface in firmware versions 2.5.4 and 2.5.11.

This instruction will show in detail how to download the firmware and how to flash the DIR-300 D1 with a new version of the software for two versions originally installed on the router - 1.0.4 (1.0.11) and 2.5.n. I will also try to take into account all possible problems that may arise in this guide.

If you have already connected the router and know how to log into its web interface, you do not need this section. I’ll just note that it’s better to update the firmware via a wired connection to the router.

For those who do not have a router connected yet, and who have never done such things before:

  1. Connect the router with a cable (included) to the computer from which the firmware will be updated. The computer's network card port is LAN port 1 on the router. If you do not have a network port on your laptop, then skip this step; we will connect to it via Wi-Fi.
  2. Plug the router into a power outlet. If a wireless connection is used for the firmware, after a while the DIR-300 network should appear, not protected by a password (provided that you have not changed its name and parameters previously), connect to it.
  3. Launch any browser and enter 192.168.0.1 in the address bar. If suddenly this page does not open, check that in the parameters of the connection you are using, in the properties of the TCP/IP protocol, Obtain IP and DNS automatically is set.
  4. When prompted for a login and password, enter admin. (When you first log in, you may also be asked to immediately change the standard password; if you change it, don’t forget it, this is the password for entering the router settings). If the password does not work, then perhaps you or someone else changed it earlier. In this case, you can reset the router by pressing and holding the Reset button on the back of the device.

If everything described was successful, we proceed directly to the firmware.

The process of flashing the DIR-300 D1 router


Depending on what firmware version is currently installed on the router, after logging in you will see one of the configuration interface options shown in the picture.

In the first case, for firmware versions 1.0.4 and 1.0.11, do the following:

  1. Click “Advanced settings” at the bottom (if necessary, turn on the Russian interface language at the top, Language item).
  2. Under System, click the double right arrow and then Software Update.
  3. Specify the firmware file that we downloaded earlier.
  4. Click the "Update" button.

After this, wait for the firmware of your D-Link DIR-300 D1 to complete. If you feel like things are frozen or the page has become unresponsive, please go to the Notes section below.

In the second option, for firmware 2.5.4, 2.5.11 and subsequent 2.n.n, after entering the settings:

  1. In the menu on the left, select System - Software Update (if necessary, enable the Russian language of the web interface).
  2. In the "Local Update" section, click the "Browse" button and specify the firmware file on your computer.
  3. Click the "Update" button.

Within a short time, the firmware will be downloaded to the router and updated.

Notes

If, when updating the firmware, it seemed to you that your router was frozen, because the progress bar in the browser moves endlessly or simply shows that the page is unavailable (or something similar), this is simply because when updating the software, the connection between the computer and the router is interrupted, you just need to wait a minute and a half, reconnect to the device (if a wired connection was used, it will restore itself), and go into the settings again, where you can see that the firmware has been updated.

Further setup of the DIR-300 D1 router is no different from setting up the same devices with previous interface options; the differences in design should not scare you. You can look at the instructions on my website, the list is available on the page (I will prepare manuals specifically for this model in the near future).

Hello, dear readers of the inforkomp blog. So, as you understand from the title of the article, today I want to return to the topic again: setting up a wireless access point. To be more precise, I want to talk about: how to flash a router and why do it. I will show the process of resetting the software using an example. Wi-FI router Dlink Dir-300. But, if your router model is different from the one shown here, it’s okay, the process itself is the same, except that only the design of the settings window and the name of the menu items will differ.

Why did I decide to write specifically about the router firmware? First of all, the idea of ​​writing an article about router firmware update, but I couldn’t get it together and do it. The second reason is that recently, many of my friends have begun to ask me exactly this question: how to flash a router, what to press and what firmware to use.

As a rule, many users initially try to update it. For example, when purchasing or setting up a new device, I personally check the firmware version and, if possible, update it to the latest version. And you know what, my router has probably been working for more than a year now and has never frozen.

I believe that it is necessary to update the firmware on the router. The very meaning of updates is that when developers release new firmware versions, they correct all the shortcomings and errors that could appear when working with the Internet and the router. Moreover, the process of flashing the router itself is very easy.

Therefore, if you have serious problems with Wi-Fi, then be sure to read the article and try to reflash your Wi-Fi router.

Why reflash your router?

Well, there can be a lot of reasons to flash a router. Here are a few of them:

  • 1. The most common reason is updating the firmware for stable and high-quality operation of the Wi-Fi signal;
  • 2. No device receives a Wi-Fi signal;
  • 3. The message that the smartphone and computer is constantly on;
  • 4. The Internet cable inserted into the WAN port is not visible or not detected;
  • 5. The Wi-Fi signal constantly disappears and appears; etc.

In general, there are simply a huge number of types of problems that the router firmware can help you deal with.

Preparation and selection of firmware

IMPORTANT!!!

  • Choose your firmware carefully. Do not make a mistake in determining the hardware version of the device;
  • Disconnect the Internet cable from the router, leaving only the power supply and connection to the computer;
  • You should only flash the router using a network cable, which we connect to any port of the access point (except WAN), and the other side to the computer’s network card. You cannot update the router software using WiFi;
  • All settings, passwords and logins will be reset to factory settings. What, after the update you will have to configure it again;
  • Do not turn off the access point while flashing;

Well, let's start by determining the revision of the router and downloading the required firmware. In order to find out the hardware version, we need to turn the device over and look at the sticker with technical information. I have this " H/W Ver.: B5" And " F/W Ver.: 1.2.94“Therefore, for those who have the same revision or B6, then download the firmware here: link.

For those who have Dlink dir-300 NRU B7, download the update from this link, selecting the desired version. For owners of routers with revision B1, B2, B3, download. If you have a different router, then go here, and in the list that appears, select the device with the appropriate revision. Then, going to the folder " Firmware", which contains the latest firmware version in the form of a "bin" file.

Now, by clicking on the file, we save it to the computer.

Once again, be careful when choosing the firmware version. Because if you try to install the firmware that is required for revisions B1-3 on a router with revisions B5-7, this may cause it to break. And it will be possible to restore its functionality only at a service center by paying a certain amount for it.

Firmware for D-Link Dir 300 router

As always, for any setup, first use the technical data (password, login) indicated on the sticker. If you accidentally forgot your password, then you will need.

The web interface window of our device will open.

To start updating the router firmware, you need to go to the following menu items: “ System» -> « Software Update».

In the firmware update menu, click on the " Choose"We will be required to find the downloaded file and open it. If the name appears next to the selection button, then everything is in order. To start the process, click on “ Update».

All that remains is to wait for the firmware update to finish and reboot the router.

The next time you enter the settings, use the standard password and check the current software version.

Also, do not forget that all settings are abandoned. Therefore, be sure not to forget. Leave comments if you have questions or need help finding the right firmware.

Updating the firmware of the D-Link Dir 300 router

If you need DIR-300 firmware, then here you will find all the necessary information. A few points worth noting:

  • If your power goes out during flashing, there is a chance of breaking the router. So first, make sure you have stable electricity and good power cables. You can connect D-link DIR 300 via a UPS for the duration of the firmware.
  • Updating the firmware yourself will void the warranty.

    • Why might an update be required? Sometimes you don’t even need an update, but a reinstallation of an existing firmware version. Causes:

    • The Internet is slow and glitchy.
    • New functions introduced in the new software version are required.

    Firmware is like a driver or operating system for a router. Firmware written to the device's permanent memory. First you need to download it.

    Brief instructions

    In short, the essence of how to reflash:

    • Download firmware for D-link DIR 300 from ftp.dlink.ru.
    • Go to the router page 192.168.1.1 (or 192.168.0.1).
    • Head to the “Maintenance” section, then “Firmware Update”.
    • Select the firmware file, click “Upload”.
    • Wait 2 minutes while the router installs the firmware. All.

    Now everything is the same, but in more detail.

    Firmware download

    • It weighs only a few megabytes. In the address bar, write the address dlink.ru, then go to the official website of the router developer, this is ftp with firmware.
    • In the folder called pub, find the Router section.

    • After that, find the folder with the firmware for your router model and revision, in our example it is DIR-300_NRU.

    • Next, head to the Firmware folder.


    • Now you need to find out the revision of the DIR router. You need to take your router, turn it over, and look at what is written on the sticker on the underside.
    • In this case it is B1, you could have A1/B1/C1/D1/B3/B5/B7/B6.

    • By opening the folder on ftp called Firmware, select the section that corresponds to your DIR300 router model.

    • Download the firmware. This is a small file with a bin extension.

    Connecting the router to a PC

    Connect D-link to your computer via patch cord. You can reflash from regular desktop PCs, laptops and netbooks. Turn on the router. You need to check your network settings.

    • In Win7, go to “Start”, then to “Control Panel”, then “View network status and tasks”.
    • Find the “Change adapter settings” link in the left menu. Find the icon for local connection. network, go to connection properties.
    • A window will open, select protocol version 4 (TCP/IPv4) and click the “Properties” button.

    • On the “General” tab, see if the settings are set: “Obtain an IP address automatically”, as well as “Obtain a DNS server address automatically”.

    Now directly to the firmware update.

    Flashing


    • Open your browser, instead of the site address write 192.168.1.1, you will go to the page generated by the router.
    • Enter your login and password to access the DIR 300 settings. If you did not set a password, then simply write admin.
    • On the router page you can find out the revision version (marked with a light green arrow at the top), this is necessary in case the sticker on the bottom of the router has become worn or peeled off.
    • Go to the “Maintenance” section, then to “Firmware Update. Then go down to “Firmware upgrade”, then “Select file”.
    • Find the downloaded official firmware from D-link on your computer. After that, click “Upload”.

    • The router firmware update will begin, it will take exactly 2 minutes. Do not disconnect the router from power during this time, otherwise it may cause damage.


    • When the update is finished, you will be redirected to the login and password window.
    • Look at the top line, if you updated the firmware to a new version, then there should be changes there. If you just flashed it (similar to reinstalling Windows), then you will have the same firmware version number waiting for you.

    When the DIR-300 router firmware is reinstalled, the Internet settings do not change. You can continue using your computer immediately.

    Firmware for the D-Link DIR-300 C1 model


    • To reflash the D-Link DIR-300 C1 router, you need to download the firmware file (.bin) from here.


    • After that, download the zip archive from here.


    • Make sure your router is connected to your computer (laptop or netbook) via a cable connection and not via Wi-Fi.
    • Unpack the downloaded zip archive on your computer and run the dcc.exe program.
    • After this, D-Link Click’n’Connect will launch. In it, select “Connect and configure a device.”

    Update the software, it's easy - the tips will help. As a result, not the latest, but working firmware for this model will be installed. If you are satisfied with the operation of the router, then you don’t have to continue.

    Updating D-Link DIR-300 C1 to the latest version

    But if you want to update the D-Link DIR-300 C1 software to the latest firmware version, then...

    • Go to the router settings, find the “System” section, and then “Software Update”.
    • There, select the firmware bin file (we downloaded it earlier).
    • Then click “Update” - wait the standard 2 minutes for an update.

    Error messages or the router may freeze, then do not turn off the power, but wait another 5-10 minutes for the installation to complete correctly.

    DIR 300 N150 revision D1

    Flashing DIR 300 N150 D1 using the example of firmware version 2.5.4 with the new “Air” web interface.


    • Go to the settings in the usual way, you will see the “Start / Information” page, there you can find the exact model name and firmware version.

    • To install new or reinstall old firmware, click on its version, the “System / Software Update” page will open.
    • Use the Browse button to select the update file (previously downloaded from here).
    • Click Update. Waiting 2 minutes.


    This is what the firmware file looks like on the manufacturer's ftp server

    Restoring settings

    If you flashed the DIR-300 unsuccessfully, you can restore the router to factory settings.

    • The easiest way is to use the RESET button on the router case; you will need a toothpick, since the button is recessed into the case. Press it for 10 seconds, release, after which the router will reboot and start with the settings reset.
    • You can also use the corresponding item in the web interface settings menu.

    You learned how to install the official firmware on the DIR 300 router (revisions A1/B1/C1/D1/B3/B5/B7/B6). Also on our website you can read how to set up the Internet on the D-link DIR 300 router.

We have already looked at setting up and installing the D-Link DIR router, today we will talk about flashing it.

Model Definition

First of all, you need to determine the model of your router, so that you can then select the D-Link firmware we need. The model is written on the bottom of the device.

Download from the official website

Only after you have accurately determined the router model, do we proceed to downloading the firmware for the D-Link DIR-300 router. The company has a website with all its D-Link firmware, which greatly simplifies our task. Go to the address - http://ftp.dlink.ru/pub/Router/ This page contains programs for all routers of the company we are interested in. In this list we need to find our device.

At this point, follow the link called D-Link “DIR-300_NRU”. It contains programs for many models at once. Then you need to select the Firmware folder. And here we select the model that you have. For example, we have a DIR 300 NRU B7 router. For you this could be, for example, NRU B5. In the folder where we went there is a file with the extension “.bin”. We download this file.

Software Update

Go to the device settings. If anyone doesn’t know, then in the browser you just need to go to the site 192.168.0.1 or 192.168.1.1. If the page interface is designed in dark gray tones, then click on the “Advanced settings” link, it is located in the lower left corner, as shown in the screenshot.

In the “System” column there is an arrow to the right, there is “Software Update”.

In the window that opens, select “browse” to select the file of interest to us. We select the file that was previously downloaded, the one with the extension “.bin”. Click the “update” button. This completes the update. Let's consider updating on other interfaces.

If the interface is old, white background, blue panels, then we act a little differently. Go to the same router settings. Enter our username and password. In the top panel there is a “System” item. A list appears where we select “Software Update”. Select our file and update the software.

D-Link router firmware interface 1.2. has marine tones, blue-green color menu on the left. Select “System”, “Software Update”. After these steps, as usual, select the file and update.

There is also an older D-LINK DIR-300 firmware, version 1. A dark gray menu, and in English. We select “MAINTENANCE” in the top menu, then our choice falls on “Firmware Update”, which is in the left list. Select the file and click update.

This is how we essentially update the software in one step. The only problem can be the lack of Russian language in the old firmware.

Attention! It is important to understand that under no circumstances should you turn off the device, stopping the software update process.

Video on the topic

Happy Internet to you!